HINT: The ANGLED HOLDER will become your most used holder when you add it to your collection.

Fig.	Series	Part Number	Tool Support Height Above Compound 'T' Min. Max.		Max Tool Bit Size	Angle "C"	Angle "R"	Price
H	600	8051	.200	1.100	3/8"	25	0	$43.50
J	900	8075	.505	1.205	3/8"	30	0	$38.00
I	900	8069	.542	1.242	3/8"	30	7	$38.00
J	950	8122	.567	1.017	1/2"	30	0	$42.00
J	1200	8052	.805	2.055	1/2"	30	0	$59.00
I	1200	8100	.858	2.108	1/2	30	7	$59.00

Left-hand Angled Holders offer the same advantages as the above holders and are a compliment to the right-hand Angled Holder. While the right-hand Angled Holder can be used in most all circumstances, the left-hand Angled Holder is nice for turning and facing toward the lathe tail stock.

The 25° Low-Profile Holder, and the 30° holders provide more clearance around the tool bit and allows easier access in tight spaces.

The 30° x 7° holder has an angled slot. The height is measured from the top of the compound to the bottom of the tool bit slot 1/4" out from the holder. The pointed shape of the angled holder allows you to get into tighter spots than with the Standard holder. The 7° inclination of the tool bit lets you resharpen the tool bit by just grinding the front and side clearances. Like a conventional tool holder that has a 7° to 8° inclination, the top (back) rake generally need not be ground into the top of the tool bit. This lets you resharpen the tool bit many times, only shortening the tool bit a slight amount each time, without having to completely regrind the end of the tool as can be necessary with tool bits mounted without inclination.