The OMNI-POST System

Changing tools with OMNI-POST is a breeze. Just loosen the clamp bolt and remove the tool holder. Then, install the new tool holder and tighten the clamp bolt. The tool bit maintains its exact position from its previous setting. That's all there is to it .This whole process takes only seconds, saving you time and increasing versatility. Indexing allows the tool holder to be placed in the exact same position each time it is used. The unique OMNI-POST base provides 48 discrete radial positions for fine radial positioning.

Each quick change holder has a self-locking height adjustment separate from the mounting clamp. This feature lets you install any OMNI-POST holder without re-adjusting the height each time.

Full circumference clamping secures the tool holder to the post assembly with a vise-like grip, preventing the tool holder from moving on the post during heavy cuts.

The versatility and quality of these tool holders make them desirable in the commercial environment. Their low cost design makes them affordable, even to the hobbyist. The OMNI-POST is designed with no moving parts. They are made of hardened steel to insure long and accurate tool life.

Multi Positioning - Without Losing Reference

MULTI-POSITION - No need to loosen the tool post to get the correct tool angle. KRF Company designed the OMNI-POST system for situations requiring repeated set-ups. The same tool bit can be used for turning, chamfering and facing by reindexing the holder.

QUICK SET-UP - Changing holders is a snap with the quick and convenient self-locking height adjustment. There are no additional operations required to lock the height adjustment. The OMNI-POST provides 48 indexable, repeatable positions, not just 1 or 2.

LOW COST - The OMNI-POST eliminates and replaces complex cams, gears, dovetails and slides found in other tool posts. It is rigid and chatter free. All components are machined from steel, then heat treated and have a black oxide finish. The OMNI-POST is made in the U.S.A. and grade 8 hardware is used throughout. The unhardened T-Nut is easily machined to custom fit your lathe if necessary.

Wide Range of Holders provide versatility

There are many different OMNI-POST holders available to perform virtually any cutting operation.

• Standard, Angled, V-Groove, Boring Bars and Cut-off Holders: Available in several sizes for various applications.

• Low-Profile Holders: Excellent for small lathes.

• Carbide Holders: Allow cutting hardened steel, etc.

• Post Assemblies: T-Nuts on the Post Assembly are available in several sizes to fit various compounds.

All OMNI-POST tool holders can be ordered separately. This way you can "build" your set to suit your purpose.